The face of the
regulator is now placed on the ground glass after smearing it with oil
and oilstone dust. It requires but a very slight coating to do the work.
The grinding is continued until the required surface is dead flat, after
which the work is washed with soap and water and the shellac dissolved
away with alcohol. The final polish is obtained on the zinc lap with
Vienna lime and alcohol. Where lathe cement is used for securing the
regulator to the plate _A_, the alcohol used with the Vienna lime
dissolves the cement and smears the steel. Diamantine and oil are the
best materials for polishing when the regulator bar is cemented to the
plate _A_.
KNOWLEDGE THAT IS MOST ESSENTIAL.
_The knowledge most important for a practical working watchmaker to
possess is how to get the watches he has to repair in a shape to give
satisfaction to his customers._ No one will dispute the truth of the
above italicised statement. It is only when we seek to have limits set,
and define what such knowledge should consist of, that disagreement
occurs.
Pages:
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102