About
the most available means of conveying power from the escape wheel to the
oscillating arc _l_ is to provide the lip of said arc with an inclined
plane, along which the tooth which is disengaged from _l_ at _f_ to
slide and move said arc _l_ through--in the present instance an arc of
eight and one-half degrees, during the time the tooth _D_ is passing
through ten and one-half degrees. This angular motion of the arc _l_ is
represented by the radial lines _k f'_ and _k r_, Fig. 8. We desire to
impress on the reader's mind the idea that each of these angular motions
is not only required to be made, but the motion of one mobile must
convey power to another mobile.
In this case the power conveyed from the mainspring to the escape wheel
is to be conveyed to the lever, and by the lever transmitted to the
balance. We know it is the usual plan adopted by text-books to lay down
a certain formula for drawing an escapement, leaving the pupil to work
and reason out the principles involved in the action.
Pages:
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30